This file shows the command line codes necessary to create the following cantilever beam in ANSYS.

/TITLE, Dynamic Analysis
/FILNAME,Dynamic,0			! This sets the jobname to 'Dynamic'
/PREP7

K,1,0,0
K,2,1,0

L,1,2

ET,1,BEAM3 

R,1,0.0001,8.33e-10,0.01  

MP,EX,1,2.068e11 
MP,PRXY,1,0.33
MP,DENS,1,7830

LESIZE,ALL,,,10
LMESH,1

FINISH

Close this window to return to the Dynamic Analysis Tutorials.